Resin drip holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instead of using a separate structure to support the vat holder, I made a fitting that tightly fits over the top of…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 1246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Instead of using a separate structure to support the vat holder, I made a fitting that tightly fits over the top of the Halot one Z-axis tower. I also divided the vat holder into two parts, so that it is printable on the Halot one.
Use a couple of countersunk M4 screws to attach the vat holder to the mount. Or just glue them all together.
How I Designed This
You can find my design (and copy it for remixing, etc) at https://cad.onshape.com/documents/b093cbf976e85d3253c9fc78/w/7db8ee17bfcecae166946632/e/aa764c990ffe1c04f3a1c5da or search Public Documents at cad.onshape.com for "Drip Holder"
Category: 3D Printer Accessories