Mandalorian - This is the way 2D wall art (Remix - stacked)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple remix of dtm2477's piece here (https://www.thingiverse.com/thing:4062243). I printed the two halves…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 432
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is a simple remix of dtm2477's piece here (https://www.thingiverse.com/thing:4062243). I printed the two halves separately and super glue'd them together, but you could achieve the same effect by stacking the models and changing filament during printing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Resolution:
0.2
Infill:
20%
Filament: Matteforge, Hatchbox PLA Black, White
Notes:
I printed the bottom half with 3 top and bottom layers, but in retrospective I'd recommend at least 4 top layers to prevent the infill from showing through.
For the print in the picture, I scaled both parts up by 115% in the xy directions (not z), and rotated counter clockwise by 45 degrees to fit on an [Ender 3](https://www.amazon.com/Official-Creality-3D-Removable-220x220x250MM/dp/B07K3SZBHJ?dchild=1&keywords=ender+3&qid=1612857257&sr=8-1-spons&psc=1&linkCode=ll1&tag=thingiverse09-20&linkId=5419ace64a5f58b068a896710257ed13&language=en_US&ref_=as_li_ss_tl) / 3 Pro bed.Category: Art
