1 / 8
Tripod Mounts: Cold Shoe and Ram Ball Mounts with 1/4 20 Thread
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cold Shoe and Ram Ball Mounts with 1/4 20 Thread Adapter
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 446
- Wydruki
- 2
- Wyświetlenia
- 3171
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (118)Powiązane
I needed a simple cold shoe mount for off camera lighting that had a ¼ 20 thread for attachment to tripod. Also including a base plate without the cold shoe so you can model your own accessory mounts.
Models:
- Cold_Shoe_Screw_Mount.stl - Full Cold Shoe w/Threaded Mount
- Cold_Shoe_Screw_INSERT_Mount.stl - Full Cold Shoe w/1/4 20 Nut Insert
- Cold_Shoe-Ball_Screw_INSERT_Mount.stl - Cold Shoe with tampered bottom and 1/4 20 Nut Insert
- Ram-Ball_Screw-Mount.stl
My Print Settings:
- 0.16mm or 0.20mm Layer height
- 4 perimeters
- 50% infill or your own preference
- Supports = YES