Tomica Ferrari LaFerrari Display Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The display is designed for Tomica Ferrari LaFerrari, the one seen in pictures have its rims swapped.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 920
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Description
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
-BaseV4-StripeV2.STL
2) Base back wall:
-BoxBackV4.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV4-Stripe":
1) Start (Lines background colour, mine is in black)
2) Layer 4 (Right stripe colour, mine is in red)
3) Layer 11 (Middle stripe colour, mine is in white)
4) Layer 16 (Left stripe colour, mine is in green)
5) Layer 21 (Overall base colour, mine is red)
Filament change layer for colours on "BoxBackV4":
1) Start (Stripes background colour, mine is in black)
2) Layer 9 (Lowest stripe colour, "F" background colour and overall wall colour, mine is in red)
3) Layer 14 (Center stripe colour and LaFerrari logo, mine is in white)
4) Layer 19 (Right stripe colour, mine is in green)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/