Side Cover for Da Vinci 1.0 3D Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Da Vinci 1.0 has 2 holes on the side of the printer that can be used as a carry handle however i worry that air…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The Da Vinci 1.0 has 2 holes on the side of the printer that can be used as a carry handle however i worry that air flow can go through the 2 holes and cool down the ABS print causing warping so i made some covers to install in the printer so it won't allow air to flow through.
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
Yes
Supports:
No
Infill:
20%
Filament:
Tecor ABS
Red Post-Printing =============
Notch fitment
After printing the side cover cut the triangle notch down by half its length, this will make it easier to fit the panel into the slot and still allow it to lock in place in the existing notch holes.
Category: 3D Printer Accessories