.310 Cadet 25 round ammo box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The .310 cadet was a centerfire round used in the BSA Martini Cadet, a popular rifle used by the Australian cadets and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
The .310 cadet was a centerfire round used in the BSA Martini Cadet, a popular rifle used by the Australian cadets and the Australian military as a training rifle.
Finding any good way to store the ammunition is hard so I decided to make one myself. This box can hold 25 rounds and a lid can be slid over the ammunition to keep it in place and keep dust out.
Printing:
0.2 standard quality with a 0.4 nozzle
Infill of 50% but this could be reduced
The box itself was printed with supports for the top rails
The lid was printed with ironing enabled to produce a smoother finish
The holes are made to be exactly 8.95mm, if your 3D printer prints the holes slightly smaller like mine did then widen the holes with a 9mm drill bit.
The lid has a 0.5mm tolerance from the left side to the right so if the printer is off by less than 0.5mm it should still slide in.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
50
Filament: Tecor PLA Black/Noctilucent Blue
Notes:
.310 Cadet is also known as .310 Greener and .310 Martini
Category: Sport & Outdoors