"String Wrangler" Cover for Lack Trash Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got tired of all the strings of perimeters falling out of the trash can, so I made a cover that will hold them in…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 1148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I got tired of all the strings of perimeters falling out of the trash can, so I made a cover that will hold them in place / catch them when you put trash in.
Print Settings
Supports:
No
Resolution:
0.2mm
Infill:
15% or less
Filament:
N/A TPU
Notes:
Must be TPU, I suggest low infill or it'll kind of hurt your fingers, since it won't be flexible enough.
It snaps right on the original trash bin, but you should glue it with rubber cement to ensure that it doesn't get pulled off with repeated use / extraction of fingers.
Category: 3D Printer Accessories