Kirkland KS1 Putter Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement badge for the Kirkland KS1 Putter
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 2347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't like the Kirkland Signature badge on the head of the KS1 printer so I removed it and modeled a replacement. I used a heat gun to loosen the adhesive and a small flathead screwdriver to pry it off. A larger flathead takes care of most of the gunk and some Goo-Gone cleans up what is left.
You can print the model the way it is if you just want to fill the void. Otherwise, you can put some text or a design on top of it, then switch filament mid-print to make it pop (as seen in the pictures).
There are two versions of the model, one with a notch to make it easier to remove and another without for a cleaner look. I tested this on two putters, one it snapped into place and the other required just a tiny bit of sanding on the edge to fit. I think hot glue would ensure it stays in while making it easy to remove in the future.