Sapphire Pro Dragon Hotend Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello there, This mount is a remix for the TwoTrees Sapphire Pro with a Dragon Hotend. The hotend is mounted rigid…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Hello there,
This mount is a remix for the TwoTrees Sapphire Pro with a Dragon Hotend. The hotend is mounted rigid with screws, so one handed nozzle swaps should be possible. It uses 5010 radial fans, because my original 4010s were dramatically underpowered.
I know it's not the cleanest remix (I'm not the best at designing), but for me it works really nicely.
The fanducts are not really aerodynimcal approved, just made with my gut feeling and a bit of thinking.
The BL-Touch sticks out a little and I have a newer, but longer Z-screw, so I had to change the position of the endstop by 20mm. The offsets between the nozzle and the probe are x:0mm and y:22mm.
I really like threaded Inserts and M3 srews, so most of the mount is assembled with them.
I hope you like the remix!
Remixed from: https://www.thingiverse.com/thing:4680533
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.3mm layer height
Infill:
20%
Category: 3D Printing