mmWave - ESP8266 D1 Mini - Presence SEN0395 Sensor Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure to house the mmWave SEN0395 presence sensor that is used by the ESP8266 board.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 147
- Wydruki
- 2
- Wyświetlenia
- 2087
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an enclosure to house the mmWave presence sensor that is used by the ESP8266 board. The mmWave sensor build was created following the Everything Smart Home Video channel. I recommend watching the video to understand how to build the sensor. This case can sit flat on the surface or it also has a standard tripod thread located inset on the bottom of the case so that you can attach it to any accessory stand. I also included a generic short stand in the print which screws into the bottom. No screws needed, everything pops together, very snug fit to secure both boards in place. There is recessed square on the front of the case to help understand which direction to point the device.
No supports are needed as long as printed upright as shown in 3d model.
I am replacing many motion sensor devices around my house with this custom build as it is very quick response, extremely accurate and no false off triggers.