Holder for Husqvarna BLi battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for Husqvarna batteries you can mount on the wall, in your car or in on the ceiling. Works perfectly.
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 924
- Wydruki
- 12
- Wyświetlenia
- 3951
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a holder for Husqvarna batteries.
It will hold and lock the batteries i place so you kan mount it with screws in your car, on the wall, or on the ceiling, and it cant fall out.
There are two versions. One for the BLi300 Battery, and that fits alle the others.
The back is open, so you can mount a spring if you want. The the battery will fly out when you release it.
NOTE!!
There is a couple of small taps you have to remove with at sharp knife. (See pictures) This way you dont have to print support.
I printet mine with PLA. 0.4 nozzle, 0.2 layerheight and 4 line wallthickness. 15% infill.
Hope you enjoy.