5 Inch Sandpaper Disc Storage Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Deeper drawers with labels for the storage unit designed by Mgotier.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 1104
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the drawers for the storage unit designed by Mgotier. The grid alignment system has been removed from the bottom allowing for a deeper cavity. Using a 0.4mm nozzle and the 0.3mm DRAFT setting in PursaSlicer this also reduced both print time and filament use by about 25%.
There is a blank faced drawer as well as labeled drawers for 40, 60, 80, 120, 180, 220 and 320 grit discs. If you'd like any other labels please leave a comment and I'll try to add them.
In the photo of the full rack the 40 is Mgotier's original design with a label added. The 60 is my first remix and the rest are the current design (v2).