Box / case / housing for Wemos D1 mini and NRF24L01+ (for Ahoy project - Hoymiles solar inverter communication)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,60 € – 1,96 € netto (bez VAT)
Dla pliku: 220619Box_Ahoy_noAntenna_0.2mm_PLA_MK3S_1h53m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,78 € netto (środek widełek).
- Masa podana przez autora
- 20 g
- Czas druku podany przez autora
- 1,89 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a case specifically designed to host a Wemos D1 mini and the NRF24L01+.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 1661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here.
I made this box to house the hardware - of course it can be used for other projects using this hardware. Once everything is set you can glue the lid shut if friction and gravity is not enough (which it is for me). I purposefully left a slit for the antenna of the Wemos to not limit signal strength. I am sure the Wemos mini pro would also fit. Editable, partially parameterized source is included.
2022-08-02: added a second version without the hole for the antenna if you are using that version of the NRF24L01+