1 / 11

Yaber Projector Mount

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

This is a bracket and non-invasive shelf mount that allows you to mount your Yaber, or similar, projector in an elevated position.

The project requires SIX M5x16mm screws, and one 1/4inch x31 mm screw and nut (or similar).

All parts in white were printed in PLA+ with a 0.6mm nozzle

All parts in orange were printed in TPU

Printer Brand:

Creality

Printer:

CR-10 Mini

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.3 mm

Infill:

20% Triangle

Filament: GST3D PLA+ and TPU White

Notes:

Will need to turn sideways for Ender 3 sized beds. Easily printed on a 300mm bed

1.6mm walls have worked so far, turn your cooling below 70%

Good luck!

Category: 3D Printing