USB Plug Type A casing Ummantelung Stecker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have printed it at 0.04mm and 0.2mm layer height and both look great. I have designed this casing because I soldered…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I have printed it at 0.04mm and 0.2mm layer height and both look great.
I have designed this casing because I soldered the usb plug from an old usb cable to my broken usb type-c cable and needed an enclosure.
I have added a step-file so you can modify it with a 3d-modeling software.
The step-file contains both halves but the stl-file just one half.
To print both halves at once, just multiply it in your slicer or open the file twice.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
Yes
Resolution:
doesn't matter
Infill:
doesn't matter
Post-Printing
Glue it together
I have hot glued both halves to the bare plug. If you have a better option just leave a comment :D
Category: Gadgets