Artillery SWX1 Bed Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I based my design off of LarnOm ender 3 bed handle as it's worked well for my Ender 3 Pro's. This handle is made for…
- Ocena
- 4,5 / 5
- Polubienia
- 12
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 693
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I based my design off of LarnOm ender 3 bed handle as it's worked well for my Ender 3 Pro's. This handle is made for the Artillery Sidewinder X1 which is wider and has a bit of different spacing requirements. First file is the logo curved version, 2nd file is a flat variant with no logos, 3rd file is the no logo curved version and the 4th is flat with both the artillery lettering and the X icon. Both flat versions are designed with a center hole to mount a camera. Printed at .2 with 50% infill for stability. you could possibly use 30% and be just as good.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
30-50%
Notes:
You can print it flat if desired but it will be a bit weaker & you still need some support under the curves on any of these files. best method is to print 90 degrees from the flat with full supports for strength
Category: 3D Printer Parts