Amazon Echo Alexa Wall Mount - 1st Generation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount designed to fit a 1st generation Amazon Alexa. It is designed to be printable without support…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 612
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount designed to fit a 1st generation Amazon Alexa. It is designed to be printable without support material. Not shown in the photos is an updated cable passage which keeps the cable from hanging down too much.
This has been confirmed as not fitting the Alexa Gen 2. You can find an untested Gen 2 mount here. https://www.thingiverse.com/thing:4998039
The two holes are left in incase I need a bracket to extend upwards for support higher up.
For the mounting shown above, drywall anchors were inserted into the wall.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.4
Infill:
15%
Category: Electronics