1 / 3
Lid spacer for DeLonghi DCP707 slow cooker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The plastic spacer that attaches the handle to the glass lid broke on my DeLonghi DCP707 slow cooker. I made a new one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
The plastic spacer that attaches the handle to the glass lid broke on my DeLonghi DCP707 slow cooker. I designed a new one and printed it with colorFabb HT (a high-temp PETG rated to 100*C). The print would also work with ASA, ABS or PC. Regular PLA or PETG will likely deform.
The piece does not come into direct contact with food so it should be fine from a health perspective.