Gloomhaven Inner Wall (2 Brick Layers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Robagon's distressed inner wall for the board game Gloomhaven. I thought the wall was cool and…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Robagon's distressed inner wall for the board game Gloomhaven. I thought the wall was cool and nicely matched the top view of the tile that comes with the game, but I wanted something shorter so that it seemed more like an obstacle that could be hurdled by the minifigures. I used MeshMixer to remove one of the brick layers from the original inner wall .STL, reducing the height from 25.5 mm to 18.5 mm.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.8 mm
Infill:
20%
Filament: Hatchbox; Amolen; eSun PLA; PLA; PLA+ Stone Gray; Marble; Brown
Notes:
I did two filament swaps when printing, using stone gray for the base (which was then painted), followed by marble for the bricks, and then a brown accent on top.
I used MeshMixer to edit out one of the three brick layers that is found in the original .STL file.
Category: Games