1 / 1
TurboGrafx-16 MINI Portable
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the TurboGrafx-16 Mini console but I love portable handhelds even more. Here is my take on a modern Turbo Express
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The front and back shell are printed with PLA at a resolution of 0.2 with supports.
Here's a list of parts used if you want to source them yourself:
- TurboGrafx-16 Mini system - these are out of print but can be found on 2nd hand markets. Prices are going up though.
- PLA filament (I used OVERTURE brand) - https://www.amazon.com/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B07PGYHYV8/
- 4" HDMI IPS LCD - https://www.amazon.com/gp/product/B09QVD3HLD
- 3.7v 4500mAH Li-ion battery - https://www.amazon.com/gp/product/B07TTD2Y5G
- HORI PS4 USB controller - https://www.amazon.com/gp/product/B075Q5YMHM
- Li-ion Step-Up Battery Charger (set to 5V) - https://www.amazon.com/gp/product/B08GWTBD3T
- 2-position slide switch - https://www.amazon.com/gp/product/B07XSJYYYB
- Flat HDMI cable - https://www.amazon.com/gp/product/B07R5JPTDB
- Flat USB cable - https://www.amazon.com/Ribbon-Degree-Standard-Receptacle-Charging/dp/B07WZV9XV9
- 4-Pin connectors (to connect speakers to the LCD) - https://www.amazon.com/gp/product/B08RHGT3W
- 2-Pin male/female connectors (optional) - https://www.amazon.com/gp/product/B013JRWCBU
- 30x30x10mm blower fan (optional but I found the battery charger getting very warm so this is probably a good idea) - https://www.amazon.com/gp/product/B07RMGVBKL
- Two 30mm x 25mm (max) flat speakers (mine were taken from an old laptop but these should work if you glue them in place: https://www.amazon.com/uxcell-Speaker-Replacement-Loudspeaker-20mmx30mm/dp/B07M99X8GP or these if you slightly modify the case - https://www.amazon.com/MakerHawk-Full-Range-Advertising-Connector-Separating/dp/B07GJ4GH67
- 3.5mm audio jack connector (optional, to access the headphone jack on the LCD) - https://www.amazon.com/gp/product/B016E5PEXC
- The I and II buttons were taken from the original Mini controller. The D-pad from the HORI controller can be used.
- The Menu button can be made by cutting a GBA Start/Select button in half - https://www.amazon.com/Colorful-Conductive-Buttons-Gameboy-Silicone/dp/B07MZZWFP2
- The Run & Select buttons I used came from a random pile of buttons I had but a reasonable replacement can be made by cutting a GameBoy Color Start/Select button in half - https://www.amazon.com/Replacement-Conductive-Silicon-Nintendo-GameBoy/dp/B07DY5VB9R