Single Extruder Multi Colour Fire Plant Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thats a Coaster with the Image of the Fire Plant from Mario on it. It uses 6 Colours, no need for MMU.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
This Print uses 6 Colours but doesnt need a MMU.
Single Extruder Printers are enough.
We can do the Filament change with hand, because its only in the first layer. You need to increase your Extruder count in PrusaSlicer to 6. Load the coaster.stl into PrusaSlicer. Then right click the coaster.stl in the right menu, a new menu opens, choose add parts.
Now add all of the other .stl from here and they get centered on the coaster. You need to bring them into the right order, which is: coaster, blue part, greenpart, outlines, middle ring, outer ring, inner ring. add the right colour to each part. Should a bit like this:
Use the gcode preview to check if everthing looks good. After that you can export the gcode and start printing. My Print got a bit darker because i made the base of the coaster in Prusament Galaxy Black, but if you choose white the colours will be lighter and pop more.
Here is a little video that explains how it works, if you want to get a bit more of backround knowledge: