Pixel 4a Case Hex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Google Pixel 4a (not 5g) case , based on the design by fiunkel. Changed the following: Removed the headphone jack (I…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 1546
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
EDIT/WARNING: This must be printed in flexible filament such as TPU. It will not fit with PLA, PETG, etc.
Google Pixel 4a (not 5g) case , based on the design by fiunkel. Changed the following:
- Removed the headphone jack (I never use it, just keep it from collecting dust this way)
- Made the side buttons outdented instead of holes. Much easier to find/press this way in my opinion
- Added a hole on the top of the phone for the top mic
- Enclosed the bottom where the usb port is and left 3 holes for the port and speakers
- Cut out the back, leaving most of it uncovered to glue a popsocket or similar (or just enjoy the phone design underneath)
- Changed the back design to hex instead of the previous pattern
Print Settings
Printer:
Sunlu S8
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.16
Infill:
Doesn't matter
Filament:
Unsure TPU
Blue
Notes:
I used tree supports in Cura just to make the usb port and speakers a little easier. You could get away with not using them depending on how good/bad the bridging is on your printer.
Category: Mobile Phone