Bender Arduino robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod to convert it into Bender the robot from Futurama! made by Bricogeek
- Ocena
- 0 / 5
- Polubienia
- 59
- Pobrania
- 248
- Wydruki
- 1
- Wyświetlenia
- 3010
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Just 3D print each piece and glue it to your robot. You can use Super Glue or something similar for plastic.
Enjoy and share a make of your mod! ;)
Legs and feet are from original OttoDIY, rest of it I redesigned for printing with 0,6mm nozzle. Also added few parts to get Bender style look.
All parts were printed with 0,6mm nozzle at 0,15mm layer hight.
We invested lots of time and resources to provide open source code, software and hardware, please support this project by just giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers and makers. Join today our Otto Builder community