Routing template - Prusa Spool Coasters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a routing template. With this template and a flush cutter you can cut Prusa Spool Coasters out of wood. The…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a routing template. With this template and a flush cutter you can cut Prusa Spool Coasters out of wood. The template can be attached to the wood with double-sided tape.
You have to use a flush cutter with a bearing. If you use one without bearing the plastic could melt.
Purchased parts:
Flush Cutter: https://smile.amazon.de/gp/product/B079HZJVVY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Tape: https://smile.amazon.de/gp/product/B018GUBCWU/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
I did the laser engraving with the Anycubic Mega Pro. In the files are two JPG files, which can be used for laser engraving. Because of the file size I had to upload them as JPG. They can be easily saved with Paint as a 24-bit BMP file. I only tested the JPG file with the empty coil.
Laser Engraving Settings:
Laser Height: 53mm
Laser intensity: 40%
Pixel size: 0.1
Printer Settings:
Fill Rate: 100%
I hope you like the design and I look forward to feedback.
Category: Machine Tools