Birdy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Cute Fat Bird
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 194
- Wydruki
- 4
- Wyświetlenia
- 650
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
I printed this in a big way from abs, then i was sanding and painting. The 3mf file reflects these settings.
But i also added the normal stl.
Pro tip:
If you do it with lighting infill and 4 permiters, it will remain just as strong, but you will save material and time, in some cases not a little. And if you leave a bag or hole at the bottom, you can fill it to make it heavy.
Painting method:
1. I filled in the uglier parts around the support at the bottom with plasticine glue.
2. I painting it out with an car filler.
3. I sanded it as smooth as possible while wet.
4. Painting with stone texture spray
5. Painting matt color
6. Again painting with stone texture spray
Print Settings
- Material: Gembird - Black ABS
- Nozzle: 0.4mm
- Support: Coat: Yes (Snug)