Print-in-place Palm Ratchet Screwdriver Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
2,69 € – 3,29 € netto (bez VAT)
Dla pliku: 0.2mm_PETG_MK3S / ratchet-knob_02mm_petg_mk3s_3h29m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,99 € netto (środek widełek).
- Masa podana przez autora
- 29 g
- Czas druku podany przez autora
- 3,49 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
3D printed palm ratchet knob (stubby screw driver handle). Easy to make.
- Ocena
- 4,71 / 5
- Polubienia
- 270
- Pobrania
- 1527
- Wydruki
- 40
- Wyświetlenia
- 5881
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printed palm ratchet knob (stubby screw driver handle)
- Print-in-place : Just print, and you are all set. Assembly work is not necessary.
- Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy operation. Pressure from your palm to the screw bit effectively aligns and locks the ratchet gear.
- Two types : 1/4inch (6.35mm) hexagonal socket and 3/8inch (9.5mm) square drive.
Video
How to make

Just print the model with supplied posture. Do not use support structure.

(hexagonal socket type only) The hex socket is designed to be very tight. If you can not insert your driver bit, heat the end of hex shaft up and push it into the socket.

For the better ratchet feelings, spray the silicone lubricant to the gap.