1 / 4
Shrinkage and exposure calibration piece for resin 3D printer — zdjęcie 1
1 / 4

Shrinkage and exposure calibration piece for resin 3D printer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a test piece to precisely estimate the shrinkage of material.

Ocena
5 / 5
Polubienia
81
Pobrania
4320
Wydruki
4
Wyświetlenia
9431
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
GNU General Public License v3.0

This test piece allows you to estimate the shrinkage of the material. The piece is designed for resin printers, however, it can be also used for FDM printers to estimate shrinkage and 

You should print the test piece with regular settings flat on the build plate, let it properly cure, and measure it. Note that on a resin printer the orientation doesn't matter. There is a simple calculator to estimate the shrinkage based on 6 measurements of the piece: https://yaqwsx.github.io/printer-calculator/#/shrinkage It will not only tell you how much the material shrinks, but it will also tell you how much it overgrows by exposure bleeding.

The model comes in two flavors:

  • a regular model that you can print and
  • a model that serves as a pattern for making a silicone model. This allows you to estimate resin shrinkage when you perform silicone molding of e.g., polyurethane resins.

If you would like to know more, there is a blog post with an in-depth explanation of the problematics and the proposed solution.

Tagi