Philips Ground Coffee Bypass Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits for part no. 421944084601. This lid covers the ground coffee bypass for Philips 1200/2200/3200 series superautos.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 153
- Wydruki
- 2
- Wyświetlenia
- 802
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This lid covers the ground coffee bypass for Philips Saeco 1200/2200/3200 series superautomatic espresso machines. Fits the same space as replacement part number 421944084601, but this has vents shaped like a dog and cat instead of diamonds!
In addition to the changed vents, this model has a slightly thicker tab for the hinge pieces than the OEM part whose hinges tend to get brittle and snap off over time.
The lid is subjected to very hot water vapor from the brew unit, so PETG or another filament with higher temperature tolerances is a better choice. Anything that would melt or deform, will go down the grounds chute and probably make a real mess out of your brew unit.
Gcode provided for printing in Hatchbox PETG.
I recommend printing logo side down with support on the build plate for the hinges and the front edge. A quick pass over an open flame will clear up any stringing to make sure you don't accidentally get filament in your coffee.