Mirrored PSU-COVER-24V360W
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mirrored PSU to allow to mound board on the right side of the printer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I find it easier to mount board on the other side of the axis that has X-axis motor – that gives more options for modding, so I designed holder for the PSU I have to be on the other side of the printer.
Mirrored PSU cover for 24v 360W originally designed by Josef Průša <[email protected]> and contributors and designed supports for M4 25mm bolts.
Everything is made with OpenScad and fully customizable.
For bear-upgrade specific parts, I updated the mount to mirror it and use M4 25mm as this is the only kind of long M4 I have.
BOM
- 4x M4 8mm countersunk bolts to attach to attach the cover to the PSU
- 2x M4 25mm capscrews to attach PSU mount to the PSU
- 2x M5 10mm capscrews to attach PSU mount to the frame
- 2x M5 T-nuts to insert into the frame