1 / 7
Vesa Mount for Samsung Curved Monitor - V2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LC24RG50FZRXEN, LC24T550FDRXXU, LC24T550FDRXEN, LC27T550FDRXXU, CR24RG50,
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 386
- Wydruki
- 1
- Wyświetlenia
- 2944
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
This is a vesa mount adapter for the Samsung curved monitors. It utilises the existing mounting part that comes with the monitor - this needs to be disassembled (see below)
Parts Required
- 4 x M4 5/5.5mm threaded inserts
- 4 x M4 screws (mine came with the vesa mount)
To print:
- Print part on the flat (I used PLA but other filaments would be suitable)
- Install M4 threaded inserts
To install:
- Remove the existing base from the monitor
- Reveal screws by peeling back the felt
- Unscrew the metal plate and retain the metal plate and screws and plastic part
- Discard the base and white plastic insert
- Insert printed part into the plastic part and screw on the metal plate with the original screws
- Insert assembled part into the monitor
- Mount onto a vesa mount