Hilti Battery Adapter for DC Motors

i saw this adapter an thought i could create a box above and put a fuse and switch in it so i can control 24V DC motors without a power outlet nearby

Needed components: 

Hella 8KW 054 944-003 connector : 

https://www.pkwteile.at/hella/946006

Glass Tube Fuse Holder : 

https://www.amazon.de/Fixpoint-25526-Sicherungshalter-Gr%C3%B6%C3%9Fe-Schraubverschlusskappe/dp/B001C6JSAY/ref=sr_1_7?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2EN8KVS0QXYUE&keywords=glasrohrsicherungshalter&qid=1656073109&sprefix=glasrohrsicherungshalte%2Caps%2C86&sr=8-7

XT60 Connector : 

https://www.amazon.de/MakerStack-Batterie-Anschl%C3%BCsse-Spielzeug-Fahrzeug/dp/B074RGT76J/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2938HOMFYQFDZ&keywords=xt60+connector&qid=1656073210&sprefix=xt60+connector%2Caps%2C82&sr=8-5

Switch: 

https://www.conrad.at/de/p/arcolectric-bulgin-ltd-wippschalter-h1570-vb-aaa-250-v-ac-16-a-2-x-ein-aus-ein-rastend-0-rastend-1-st-700045.html

Digital Voltmeter ( you don't need it but i had one lying around):

https://www.amazon.de/gp/product/B08T254T7H/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

ca. 100g Filament i recommand ASA (PETG can be a little challenge to get rid off the supports)

5x M3 x 10mm Countersunk Screws

5x M3 threaded inserts

6x Cable lugs : 

https://www.amazon.de/Kabelschuhe-Flachstecker-Flachsteckh%C3%BClsen-Gabelkabelschuhe-Quetschverbinder/dp/B081PRKZXK/ref=asc_df_B081PRKZXK/?tag=googshopde-21&linkCode=df0&hvadid=407418757836&hvpos=&hvnetw=g&hvrand=3253947027330064443&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1000710&hvtargid=pla-852246247818&psc=1&th=1&psc=1&tag=&ref=&adgrpid=87348359415&hvpone=&hvptwo=&hvadid=407418757836&hvpos=&hvnetw=g&hvrand=3253947027330064443&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1000710&hvtargid=pla-852246247818

1m of 1,5mm cable

shrinking tube for the cable lugs

i connected the middle pins of the switch with the XT60 connector and S1 with the battery and connected S1 with S2 but reversed the polarity so that the DC Motor spin in the opposite direction

between Battery and Switch i used the glass tube Fuse with 8A to prevent a Fire of the Battery in case of a short

i support the complete underside but be carefully i set it manually otherwise in the holes for the cable may be support