Next Gen Enclosure Pop-Top Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really hated trying to pull the printer out of the front of the enclosure to work on it. Now I just pop the top off.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This requires modification to the enclosure top. You'll cut the enclosed tabs open on each side of the hole on the enclosure top. A small hand saw works fine or another cutting tool. Sand the sharp edges down if there are any.
Print 8 of these pop top tabs to go around the top cover. Reuse the screws and nuts that came with the enclosure to attach them to the top. Now whenever you need to work on the printer you can easily remove the top instead of trying to maneuver the printer with an MMU out of the front of the enclosure.
PLA or PTG, Draft settings, 20% grid infill.