Y-axis Endstop for Prusa i3 Rework
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a rework of a Y-axis endstop. It looks like the one I had was based off this endstop…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a rework of a Y-axis endstop. It looks like the one I had was based off this endstop (http://www.thingiverse.com/thing:82631). I needed a spacing of 30 mm for my printer so I redrew the part in Fusion 360. I left the slot as a through hole to allow placement on the left or right side of the printer.
Note: Part will most likely need to be rotated 90 deg. about X axis is your printing software. For some reason projects designed in Fusion 360 on the TOP plane are 90 degs out when I load them into the printing software. Print Settings ==============
Printer Brand:
RepRap
Printer:
Prusa i3 Rework
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
Printed with MatterControl 1.5 Basic settings with above resolution and infill.
Printed with $5 filament's Rainforest Green Adv. Ingeo PLA
Category: 3D Printer Parts