Daylight on a Stick mount for 2020 Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy way to mount Daylight LEDs on a Voron
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 422
- Wydruki
- 2
- Wyświetlenia
- 2549
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted a mount to put Daylight on a Stick LEDs in my Voron so I whipped these up. They should also work on any 2020 extrusion.
*EDIT* I uploaded a one piece version; when the gantry on my 2.4 is at the top of the chamber the bowden tube wanted to go between the PCB and the top panel. This fixes that. You'll need to create supports for the flanges that go into the extrusion.
Use a filament appropriate for your print environment, i.e. enclosed build chambers should use ABS. Use an M3x8 and hammer nut to attach to the extrusion, and an M3x8 to attach the stick. Don't tighten the stick down too much or you'll flex the PCB. Have fun!