heatbed strain releif for generic 220x220
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm making a 3d print print w/ all the random parts i have left over and wanted strain relief for this 12v 220x220mm…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I'm making a 3d print print w/ all the random parts i have left over and wanted strain relief for this 12v 220x220mm heated bed i pulled off an old am8 and could only find ones for the connector types, so i made one for mine w/ the soldered on wires with all the solder in the way.
It affixes w/ a m2.5 screw, which u can force thread into the aluminum w/ stainless steel if your bed is anything like mine, just be sturdy and careful. and then secures the cable w/ a ziptie.
It didn't turn out very nice, but i included source so anyone who just needed the push can make their own to fit just right.
Category: 3D Printer Accessories