Hex Bit Spring Maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want to make a spring for your parts? Use this tool to help!
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 262
- Wydruki
- 2
- Wyświetlenia
- 2160
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this tool to go into my Ryobi HP34LVN to make springs for battery holders. I have included multiple sizes. This will fit into any standard hex bit holder or drill chuck.
I printed mine in ABS for added strength, I also would recommend printing these horizontal (with supports) rather than vertical as it will give them more strength printing with the grain. The hole is 1/8th inch (on all but the 1/8" ID model which is 1/16") so most piano or steel wire should fit.
Has 4 versions, ½" ID model, ¼" ID Model (Great for AAA batteries), 1/8" ID model and 0.40inch ID model.
The 0.40 inch model is nearly the same size as an AA battery and works great for battery holders.