Pelican Case T-Handle Allen Key Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your allen keys upright and easily accessible in your Pelican case.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 2499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A sturdy organsier for my allen keys when I'm on away shoots and have to operate out of my Pelican AC Case. Plastic cardboard (cordaflute) was quite flimsy for a while with regular use of the tools, so I designed this 3D print version of it so it lasts ages.
The slots for the allen keys are full length, so they don't rattle or tip over and will always be standing up. Also because of these slots, there is space for other tools to be placed underneath without clashing with the allen keys (as this was a problem I had in the past).
I've designed it for the following keys as I use them the most in my Pelican 1535 Air case:
- Bondhus 1/8, 5/32, 3/16
- Bondhus 3mm, 5,5mm
- Bondhus T10
- PB Swiss Tools Flathead Screwdriver
The storage unit is held in by the Trek Pak pins.
NOTE: The pin holes need to be widened by 1-2mm for an easy removal of the tool.