1 / 4
USB Type A breakout board case — zdjęcie 1
1 / 4

USB Type A breakout board case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a case for a USB Type A breakout board.

Ocena
4 / 5
Polubienia
10
Pobrania
56
Wydruki
1
Wyświetlenia
520
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a case for a USB Type A breakout board. The size of the PCB is 15 mm x
15 mm. You'll need a drop of glue to attach the cover to the main body.

Support material is not required. An infill of 20% is recommended.

This object main web page is:  
http://www.ctheroux.com/usb-type-a-breakout-board-case/.

This object was designed using Solid Edge Community Edition.

You can request the source files on the page listed above.

Tagi