Shaped Bokeh Kit - Nikon AF-S NIKKOR 50mm f/1.8G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,30 € – 5,26 € netto (bez VAT)
Dla pliku: Bokeh Kit NIKKOR 50mm_PLA_ENDER3BLTOUCH_5h12m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,78 € netto (środek widełek).
- Masa podana przez autora
- 51 g
- Czas druku podany przez autora
- 5,2 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Create bokeh in various shapes with your preferred lens mount.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 217
- Wydruki
- 2
- Wyświetlenia
- 1244
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
Bokeh is the way the lens renders out-of-focus points of light, this is reflected in the shape of point sources of light in the background of photos.
The bokeh shape is determined by the shape of the shutter, which means you can alter it by covering the front of your lens with the desired shape - thus essentially change the affective shape of the aperture.
This model lets you cover the front of your Nikon AF-S NIKKOR 50mm f/1.8G lens either with a simple slide-on cap or a screwed-on cap for well tuned printers, and rapidly change bokeh shapes from a selection of shapes including a heart, a star, a music note and a star-of-David.
Also attached is a blank insert for you to design your own bokeh shape and upload as a remix.
Print Settings
Material: matt black filament is preferred but not crucial for operation.
Supports: minimal supports from bed only.
Layer Height: 0.16mm used for smooth insertion chamfers, Prusaslicer's smoothed adaptive variable layer height used for the lens caps.
I designed this kit for a friend's wedding and didn't get the photos from the photographer yet so the photos of the bokeh effect are sourced from the internet and will be updated as soon as I get the photos.