1 / 3
Halo Reach "Split to fit a small printer"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Clark Lee aka (RighteousMechie) hope this suits the size of your printer.
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 256
- Wydruki
- 0
- Wyświetlenia
- 1111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (66)Powiązane
Hi Clark Lee aka (RighteousMechie) hope this suits the size of your printer.
I've sized the helmet to what is recomended, but please check that suits your size needs.
What ever you adjust the single size file helmet too, just all apply the % increase and or decrease to the split file, Good luck and post some picks of it printed where you can, Cheers Jace