Rigidbot Motherboard holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created a basic rigidbot motherboard case. I used spacers to elevate the board and drilled some holes for airflow.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Created a basic rigidbot motherboard case. I used spacers to elevate the board and drilled some holes for airflow. Plenty of room to add fan. Also the extension under the cables allows to attach cable supports since the cables (particularity the power cable) are heavy and put stress on the connection on the board. I found just the extension helps but additional support would be a good idea. Yes I know the bolts I used were too long but they allow for air flow at least.
Category: 3D Printer Accessories