Gloomhaven Walls: Flat 1.75 Hex Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a specialized version of a two-hex Gloomhaven wall piece (flat edge adjacent) posted by rbross / paralepsis.…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 733
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a specialized version of a two-hex Gloomhaven wall piece (flat edge adjacent) posted by rbross / paralepsis. This wall tile has been remixed down to a length of about 1.75 hexes so that it will make a "T" wall joint by nestling into the bridging wall of a corner-to-corner wall piece. See the second photo for how it is used.
Edit: Uploaded a new version of the .STL file to correct some minor manifold errors. (8/14/22)
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.8 mm
Infill:
20%
Filament: Hatchbox PLA Stone Gray
Notes:
Wife did the painting!
How I Designed This ===================
The original .STL file was edited with MeshMixer.
Category: Games