Gloomhaven Walls: Point Walls Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the cool Gloomhaven walls posted by rbross / paralepsis that span corner to corner hex lines. The…
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 415
- Wydruki
- 1
- Wyświetlenia
- 1557
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the cool Gloomhaven walls posted by rbross / paralepsis that span corner to corner hex lines. The original walls bridge between full hexes to make room for floor tiles nestling underneath. I am not using floor tiles, and instead just placing the walls directly on the original Gloomhaven map tiles. I have remixed the original .STL files so that the bridge regions now go all the way down to the bottom of the hex tiles, eliminating the gaps.
Edit: Uploaded a new version of the "Pillar Plus - 2CC" .STL file to correct some minor manifold errors. (8/14/22)
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.8 mm
Infill:
20%
Filament: Hatchbox PLA Stone Gray
Notes:
Wife did the painting!
How I Designed This ===================
I used MeshMixer to modify the original .STL files.
Category: Games