Lewis Machine Gun & Mount Full Size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scraped up all I could with this for my mate Mitch. Hes currently building my Blastech T-21.
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 373
- Wydruki
- 0
- Wyświetlenia
- 2095
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Scraped up all I could with this for my mate Mitch. Hes currently building my Blastech T-21. Hope there is something in here that will help with your next build, I've tried to make it so you can mix and match between the T-21. If you see something you'd like modified further just let me know and I'll see what I can do, Cheers Jace
PS Most of the sizing should be correct on the 1-1 complete split files, accept for some of the individual files, they will need increasing % size wise. Good luck ; ) and post some picks of when and how you go : )
PS these pieces were pulled together from lots of different files and information, but the main contributor to the model was Kpats over at the 3DWarehouse https://3dwarehouse.sketchup.com/model/429f37d0-e240-4b5b-afb3-5744ab2f7841/Lewis-303-Machine-Gun Thanks Kpat