BlueSCSI External Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A retro-inspired case for an external BlueSCSI hard drive emulator
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 250
- Wydruki
- 4
- Wyświetlenia
- 1403
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple, sturdy case for an external BlueSCSI DB25 v1.1.
Requires two m3x10mm socket cap screws, but 8-11mm long should work as well.
Exposes the SD card slot but hides all the other things. They’re inside if you need them!
Print with the insides facing up, with support on the build plate only. Both parts are in the same print file.
Designed in FreeCAD v0.20.
HEADS UP: Regrettably this is too wide to work on my recently-repaired LC II, and probably won't fit on other machines with too-close-together ports. The ADB port is too close. I'll make a narrower version When I Have Time™. Currently I use a parallel zip-drive cable as a scsi extender, which is overkill and silly. It's like a metre long. With a tiny dongle at the end. But it WORKS!™