Gloomhaven Walls: Iron Door with Stone Lintel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Iron door with stone frame for the Gloomhaven board game. This is a remix of Xevin's iron door and fits in his door…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Iron door with stone frame for the Gloomhaven board game. This is a remix of Xevin's iron door and fits in his door frames, which I have adapted to some of my other posts. I separated Xevin's iron door into two parts - the door and the lintel - so that I could print them using different filaments.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.4 mm
Infill:
35%
Filament: eSun; Hatchbox PLA+; PLA Black; Stone Gray
Notes:
I printed these at higher nozzle resolution than the walls. Support was needed for the arched stone lintel, but not the door itself. I also used a fairly wide brim when printing both of these to help with bed adhesion. The door was printed vertically.
The lintel was superglued onto the top of the door after printing.How I Designed This
I used MeshMixer to separate the iron door into two .STLs.
Category: Games