Philips Hue Dimmer Switch (V2) Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for the Philips Hue Dimmer Switch (V2)
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 881
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Idea
I wanted a way to mount the remote to my desk (built out of 4040 aluminium extrusions).
Additional Components
- 1 Magnet 6x3mm (but up to a length of 6mm should be fine)
- To Mount: 2 screws M5 button head (ISO 7380)
- Maybe some glue to hold the magnet in place
Notes
As you see, there is a small notch on one side of the holder, this is where the top end of the remote should go.
The width is 40 mm to mount it flush to my desk. You can of course mount this holder to any other object, as you desire.
As the remote itself has a magnet built in, please check the orientation of your magnet before inserting after the print.
Print Settings
Printed in Fiberlogy Easy-PETG silver, 0.2mm layer height, Speed preset. No supports or pauses needed.
Updates
Added V2: modifications to the frame to make it a bit nicer.