Wheel Dishing Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to build a bicycle wheel dishing tool using Thule square bar
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 1858
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Instead of spending $50+ on a wheel dishing tool, I decided to design my own. The parts of this tool are designed to work with what I had laying around; Thule square crossbar, a ½" carriage bolt, and M6 knobs.
To build exactly I as I did, you will need about 1 meter of Thule square crossbar, a ½" carriage bolt 8" long, two ½-13 nuts, two M6 nuts, two M6 bolts x 20mm (dependent on your knob size), and whatever M6 knobs you have.
You'll need to drill a ½" hole in the center of the Thule bar (large side)
There are two styles of the “side arms”, one with a curved end and other flat. The tool will sit better using the flat arms. There are also two different center ends. One flat w/ lip, and one with a “spike” to semi-self-center on hub