G&G Battleowl Tracer Unit Adapter for Crosman Voodoo Spring Powered Shotgun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to use a Crosman Voodoo shotgun for indoor airsoft, but I wanted a tracer unit to attach. I therefore made…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I decided to use a Crosman Voodoo shotgun for indoor airsoft, but I wanted a tracer unit to attach. I therefore made this adapter that push fits over the orange end cap, inside the outer barrel and over the inner barrel. The fitment is very solid, and everything seems sturdy.
Print settings for best results
Print the version that has a brim added to the model itself, orient it so the brim is on the build plate, then select supports everywhere and add a support blocker for the threads. Use 0.2mm layer heights and select variable layer height, and reduce the layer heights on the threads to 0.1mm or less. For best results print in the strongest filament you have, with at least 3 or 4 outer perimeters. I printed it in eSun ePC filament so it is very strong, yet I printed a couple extra in case it breaks during gameplay.
Category: Sport & Outdoors