1 / 17
2-Wege Verteilerventil f. Aquarium / 2-way distribution valve — zdjęcie 1
1 / 17

2-Wege Verteilerventil f. Aquarium / 2-way distribution valve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2-Wege Verteilerventil f. Aquarium / 2-way distribution valve um einen Schlauch (11mm) von einer Pumpe kommend zu…

Ocena
0 / 5
Polubienia
7
Pobrania
26
Wydruki
0
Wyświetlenia
387
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution

2-Wege Verteilerventil f. Aquarium / 2-way distribution valve

um einen Schlauch (11mm) von einer Pumpe kommend zu montieren.

Verbessert:

  • Aus-/Einlauf zum einschrauben (M14), jetzt auch mit 12mm Innendurchmesser
  • 4X M5 Löcher am Boden
  • Einsatz eines / zweier Dichtringe am Ventilkörper.

Mit der Stellschraube kann eingestellt werden, wieviel der Flüssigkeit durch den Ausgang hinausläuft, oder unten am Ventil abfließt.

An alle Downloader, die keine BOTS sind:

Über ein Make, ein Like oder einen Kommentar freue ich mich sehr! Auch (konstruktive) Kritik oder Erfahrungsaustausch ist willkommen!

Bitte beachtet auch meine Designs auf https://www.thingiverse.com/rolfmobil/designs und https://cults3d.com/en/users/rolfmobil/creations

unter gleichem Benutzernamen (rolfmobil)...

2-Wege Verteilerventil f. Aquarium / 2-way distribution valve

to mount a hose (11mm) coming from a pump.

Improved:

  • Outlet/inlet for screwing in (M14), now also with 12mm inner diameter
  • 4X M5 holes at the bottom
  • Use of one / two sealing rings on the valve body.

The adjusting screw can be used to set how much of the liquid runs out through the outlet or flows out at the bottom of the valve.

To all downloaders who are not BOTS:

I am very happy about a make, a like or a comment! Also (constructive) criticism or exchange of experiences is welcome!

Please also have a look at my designs on https://www.thingiverse.com/rolfmobil/designs and https://cults3d.com/en/users/rolfmobil/creations.

under the same username (rolfmobil)...

Print Settings

Supports:

No

Category: Pets

Tagi